Ошибки аналоговых Canon
Аналоговых Canon
Если у Вас возникли следующие ошибки, Вы можете вызвать наших инженеров, для ремонта Вашей техники. Диагностика - БЕСПЛАТНО.
Напишите нам возникшую проблему, или вызовете инженера по телефонам: (495) 778-52-50, (495) 778-50-45
Canon 10, 24, 115, 14, NP112, PC3
| Код ошибки | Описание |
|---|---|
| E0 | Heat lamp |
| E2 | Scanner |
| Код ошибки | Описание |
|---|---|
| E0 | Heat problem |
| E1 | Sorter |
| E2 | Scanner |
| E4 | Drum drive |
| E5 | Lens drive |
| E6 | Exposure lamp |
| E7 | Mirror sensors |
| Код ошибки | Описание |
|---|---|
| E0 | Thermistor/thermoswitch or heat lamps |
| E1 | Sorter |
| E2 | Scanner home |
| E3 | Scanner return |
| E4 | Right front door/main motor |
| E5 | Lens home |
| E6 | Lamp regulator |
| E8 | Counter wire |
| Код ошибки | Описание |
|---|---|
| E0 | Fuser |
| E1 | Sorter |
| E2 | Scan home |
| E3 | Scan |
| E4 | Clock pulse or open RF door |
| E5 | Lens position |
| E6 | Exposure lamp, fuse 2 |
| E8 | Counter |
Canon 5L, 5ll, 5Lll, 3ll, 2L, PC-1, PC-2, PC-5
| Код ошибки | Описание |
|---|---|
| E0 | Heater problem |
| E1 | The heater film has gone off center. Turn machine off & on, make sure it's level etc. |
| E2 | Scan problme |
| E6 | Exposure lamp or exposure lamp sensor |
| Код ошибки | Описание |
|---|---|
| E000 | Low temperature, thermoswitch, thermistor or AC driver |
| E001 | High temperature, thermistor, AC driver |
| E030 | Counter |
| E202 | Scan not returning home. Scan not leaving home |
| E221 | Lamp regulator board |
| E400 | Document feeder problem |
| E500 | Sorter problem |
| Код ошибки | Описание |
|---|---|
| E0 | Thermistor, thermal switch, heat |
| E1 | Sorter, scanner home |
| E2 | Motor, clock pulse |
| E3 | Scan problem |
| E4 | Lens home |
| E5 | Lamp regulator/document sensor |
| E6 | Motor control |
| E7 | Total counter |
| E8 | Lamp regulator |
| E9 | Copyboard drive motor/board |
| ED | Motor control PCB |
| EE | DC controller on motor |
| E001 | High fuser temperature. Shorter fuser thermistor |
| E030 | Total counter disconnected or open |
| E202 | Scan problem |
| E210 | Lens problem |
| E221 | DC power supply, lamp regulator board or main board |
| E400 | Document feeder board problem |
| E500 | Sorter board problem |
| E000 | Low fuser temperature |
| Код ошибки | Описание |
|---|---|
| E001 | High fuser temperature. Shorter fuser thermistor |
| E030 | Total counter disconnected or open |
| E202 | Scan problem |
| E210 | Lens problem |
| E221 | DC power supply, lamp regulator board or main board |
| E400 | Document feeder board problem |
| E500 | Sorter board problem |
| E000 | Low fuser temperature |
| Код ошибки | Описание |
|---|---|
| E0 | Thermistor, thermal switch, heat |
| E1 | Sorter, scanner home |
| E2 | Motor, clock pulse |
| E3 | Scan problem |
| E4 | Lens home |
| E5 | Lamp regulator/document density sensor |
| E6 | Motor control board |
| E7 | Total counter |
| E8 | Lamp regulator |
| E9 | Copyboard drive motor/board |
| ED | Motor control PCB |
| EE | DC controller on motor |
| Код ошибки | Описание |
|---|---|
| E2 | Scanner |
| E0 | Heat lamp |
| D030 | Total counter or DC controller |
| E00 | Heater (Press SW301 twice to reset) |
| E001 | Over temperature |
| E010 | Drum drive clock pulse |
| E202 | Scan home position |
| E204 | Registration switch (scan problem) |
| E210 | Lens home |
| E221 | Lamp regulator or DC controller |
| E400 | Document feed problem (Check circuit breaker) |
| E500 | Sorter (Check circuit breaker) |
| E000 | Fuser problem. Low temperature. Lamp, thermal switch, AC driver |
| E001 | Fuser problem. High temperature. Triac, AC driver, pinched wire |
| E004 | Fuser problem |
| E053 | Sorter |
| E030 | Counter |
| E202 | Scan |
| E210 | Lens |
| E221 | Exposure lamp regulator board, thermal fuse, exposure lamp |
| E400 | ADF |
| E500 | Sorter |
| E710 | DC controller (main board) |
| E001 | Heater problem |
| Код ошибки | Описание |
|---|---|
| D030 | Total counter or DC controller |
| E00 | Heater (Press SW301 twice to reset) |
| E001 | Over temperature |
| E010 | Drum drive clock pulse |
| E202 | Scan home position |
| E204 | Registration switch (scan problem) |
| E210 | Lens home |
| E221 | Lamp regulator or DC controller |
| E400 | Document feed problem (Check circuit breaker) |
| E500 | Sorter (Check circuit breaker) |
| Код ошибки | Описание |
|---|---|
| E000 | Fuser problem. Low temperature. Lamp, thermal switch, AC driver |
| E001 | Fuser problem. High temperature. Triac, AC driver, pinched wire |
| E004 | Fuser problem |
| E0053 | Sorter |
| E030 | Counter |
| E202 | Scan |
| E210 | Lens |
| E221 | Exposure lamp regulator board, thermal fuse, exposure lamp |
| E400 | ADF |
| E500 | Sorter |
| E710 | DC controller (main board) |
| Код ошибки | Описание |
|---|---|
| E000 | Fuser problem |
| E010 | Main motor, motor board, clock pulse |
| E030 | Counter |
| E050 | Duplex side to side problem |
| E051 | Crossway registration |
| E200 | Scan problem |
| E200 | Scan reverse sensor or scan |
| E202 | Scan return problem |
| E204 | Document sensor, scan reverse sensor or scale |
| E210 | Lens problem |
| E220 | Lens |
| E220 | Blank lamp open or lens home problem |
| E240 | DC controller |
| E400 | Document feeder board problem or document feeder interface problem |
| E500 | Sorter |
| E620 | Editing problem |
| Код ошибки | Описание |
|---|---|
| E000 | Fuser temp low. Heat lamp, thermoswitch, thermistor, SSR |
| E001 | Fuser temperature too high or shorted thermistor |
| E002 | Fuser temperature too low |
| E003 | Fuser temperature too low |
| E004 | SSR, or lamp reg. board |
| E010 | Drive problem |
| E022 | DV unit switching problem |
| E030 | Counter not working/open |
| E202 | Scan problem. Scan sensor, scan motor |
| E204 | Scan problem. Scan sensor, scan motor |
| E210 | Lens problem. Lens sensor, lens motor |
| E220 | Exposure lamp |
| E240 | DC controller (main board) |
| E400 | RDF circuit board |
| E401 | RDF pickup motor drive |
| E402 | RDF belt motor drive |
| E403 | RDF feed drive problem |
| E404 | RDF exit motor |
| E411 | RDF sensor problem |
| E500 | Sorter board problem |
| E510 | Sorter feed motor |
| E512 | Sorter delivery motor |
| E514 | Sorter delivery motor |
| E520 | Sort stack motor |
| E530 | Vibrator motor |
| E531 | Stapler motor |
| E535 | Vibrator motor |
| E540 | Shift problem |
| E541 | Shift problem |
| E710 | DC controller |
| E711 | DC controller |
| E712 | DC controller. Document feeder board or cable |
| E800 | Auto shut off relay |
| Код ошибки | Описание |
|---|---|
| E000 | Fuser problem |
| E010 | Drive |
| E030 | Counter |
| E050 | Duplex side to side problem |
| E051 | Duplex side to side problem |
| E200 | Scan problem |
| E202 | Scan return problem |
| E204 | Scan |
| E210 | Lens problem |
| E220 | Blank lamp open or lens home problem |
| E240 | Bad DC controller |
| E400 | Document feeder board problem or document feeder interface problem |
| E500 | Sorter |
| E620 | Editing problem |
| Код ошибки | Описание |
|---|---|
| E000 | Low fuser temperature. Heat lamp, thermoswitch, thermofuse, thermistor, SSR |
| E001 | High fuser temperature. Thermistor, SSR, pinched wire |
| E002 | Low fuser temperature. Same as E002 |
| E003 | Same as E000/E001 |
| E010 | Same as E002 |
| E022 | Motor drive problem |
| E030 | Counter |
| E202 | Scan motor, sensor |
| E204 | Scan motor, sensor |
| E210 | Lens motor, sensor |
| E220 | Exposure lamp |
| E240 | DC controller (main board) |
| E401 | Pickup drive problem (might be Doc. Feeder) |
| E402 | Document belt drive problem |
| E404 | Exit motor (document feeder) |
| E411 | Document sensor (document feeder) |
| E500 | Sorter/machine communication problem |
| E510 | Sorter drive problem |
| E530 | Sorter home sensor |
| E531 | Stapler unit swing sensor |
| E540 | Sorter cam sensor |
| E541 | Sorter cam sensor |
| E710 | DC controller (main board) |
| E712 | DC controller or document feeder board |
| Код ошибки | Описание |
|---|---|
| E000 | Fuser problem |
| E010 | Main motor, motor board, clock pulse |
| E030 | Counter |
| E050 | Duplex side to side problem |
| E051 | Crossway registration |
| E200 | Scan problem |
| E202 | Scan return problem |
| E202 | Scan home sensor or home scan |
| E204 | Document sensor, scan reverse sensor or scale |
| E210 | Lens |
| E220 | Blank lamp open or lens home problem |
| E240 | DC controller |
| E400 | Document feeder board problem or document feeder interface problem |
| E500 | Sorter |
| E620 | Editing problem |
| Код ошибки | Описание |
|---|---|
| E000 | Low fuser temperature. Heat lamp, thermoswitch, thermofuse, thermistor, SSR |
| E001 | High fuser temperature. Thermistor, SSR, pinched wire |
| E002 | Low fuser temperature. Same as E002 |
| E003 | Same as E000/E001 |
| E010 | Same as E002 |
| E022 | Motor drive problem |
| E030 | Counter |
| E202 | Scan motor, sensor |
| E204 | Scan motor, sensor |
| E210 | Lens motor, sensor |
| E220 | Exposure lamp |
| E240 | DC controller (main board) |
| E401 | Pickup drive problem (might be Doc. Feeder) |
| E402 | Document belt drive problem |
| E404 | Exit motor (document feeder) |
| E411 | Document sensor (document feeder) |
| E500 | Sorter/machine communication problem |
| E510 | Sorter drive problem |
| E530 | Sorter home sensor |
| E531 | Stapler unit swing sensor |
| E540 | Sorter cam sensor |
| E541 | Sorter cam sensor |
| E710 | DC controller (main board) |
| E712 | DC controller or document feeder board |
| Код ошибки | Описание |
|---|---|
| E000 | Low fuser temperature |
| E001 | High fuser temperature |
| E010 | Main motor clock pulse |
| E011 | Bind or load on main motor |
| E020 | No TF for 3 minutes |
| E030 | Copy counter |
| E050 | Duplex unit |
| E201 | Scan motor |
| E203 | Scan motor |
| E210 | Lens home |
| E240 | DC controller |
| E241 | DC controller |
| E320 | CCD |
| E400 | DC controller, 24V |
| E500 | DC controller, 24V |
| E510 | Finisher feed motor |
| E520 | Stacker motor |
| E530 | Guide plate shift motor |
| E531 | Stapler motor |
| E620 | DC controller, edit board |
| Код ошибки | Описание |
|---|---|
| E000 | No fuser heat |
| E001 | High fuser temperature or shorter thermistor |
| E002 | Low temperature or bad thermistor |
| E003 | Fuser problem |
| E004 | Bad SSR (heat staying on) |
| E010 | Drive |
| E020 | Black toner motor |
| E030 | Counter |
| E080 | Interface problem with color unit |
| E081 | Vertical drive motor |
| E082 | Horizontal drive motor |
| E083 | Color unit sensor on right |
| E084 | Color unit sensor on left |
| E085 | Color unit release sensor or release or solonoid |
| E086 | Color unit claw release |
| E089 | Laser problem |
| E100 | Laser problem |
| E110 | Laser motor |
| E140 | Laser |
| E202 | Scan |
| E203 | Scan |
| E204 | Scan |
| E210 | Lens |
| E223 | Color unit filter drive motor |
| E240 | DC controller |
| E401 | RDF pickup motor |
| E402 | RDF belt motor |
| E403 | RDF feed motor |
| E411 | RDF document sensor |
| E500 | Sorter-Copier communication error |
| E510 | Sorter drive |
| E512 | Sorter drive |
| E513 | Sorter drive |
| E514 | Sorter drive |
| E520 | Top limit sensor or stack sensor |
| E530 | Sorter home sensor |
| E531 | Stapler home sensor |
| E535 | Stapler swing sensor |
| E540 | Stack shift sensor |
| E660 | IC card |
| E710 | DC controller |
| E711 | DC controller |
| E714 | DC controller |
| E800 | Power off circuit |
| Код ошибки | Описание |
|---|---|
| E00 | Low fuser temperature |
| E001 | High fuser temperature |
| E010 | Main motor clock pulse |
| E011 | Bind or load on main motor |
| E020 | No TF for 3 minutes |
| E030 | Copy counter |
| E050 | Duplex unit |
| E201 | Scan motor |
| E203 | Scan motor |
| E210 | Lens home |
| E240 | DC controller |
| E241 | DC controller |
| E320 | CCD |
| E400 | DC controller, 24V |
| E500 | DC controller, 24V |
| E510 | Finisher feed motor |
| E520 | Stacker motor |
| E530 | Guide plate shift motor |
| E531 | Stapler motor |
| E620 | DC controller, edit board |
| Код ошибки | Описание |
|---|---|
| E000 | Low fuser temperature |
| E001 | High fuser temperature |
| E002 | Low fuser temperature |
| E003 | Low fuser temperature |
| E010 | Drive |
| E030 | Counter |
| E080 | Color change board problems |
| E081 | Color horizontal motor problem |
| E082 | Color horizontal motor problem |
| E083 | Color problem in vertical direction |
| E084 | Color problem in vertical direction |
| E085 | Color problem in vertical direction |
| E086 | Color unit claw release problem |
| E089 | Color change incomplete |
| E100 | Laser problem |
| E110 | Laser motor problem |
| E140 | Laser unit |
| E203 | Scan drive problem |
| E210 | Lens not home or won't leave home |
| E240 | DC controller |
| E401 | Document feeder pick up motor |
| E402 | Document feeder belt motor |
| E403 | RADF feed motor |
| E404 | Document feeder motor |
| E411 | Document feeder sensor |
| E500 | Sorter to DC control interface problem |
| E510 | Stapler/sorter motor |
| E530 | Stapler swing motor |
| E531 | Stapler swing motor |
| E540 | Sorter bin motor |
| E541 | Sorter bin motor |
| E710 | DC controller |
| E711 | DC controller |
| E712 | DC controller to document feeder interface problem |
| Код ошибки | Описание |
|---|---|
| C | No problem. Means that the machine is correcting the fuser film tracking |
| CC | Drum must be changed. Could be the drum serial number is identified by the logic as being non-compatible to that particular copier |
| E000 | Low fuser temperature |
| E001 | High fuser temperature |
| E002 | High fuser temperature |
| E003 | Erratic fuser temperature |
| E007 | Fuser film off track and will not repair itself |
| E010 | Main drive problem |
| E030 | Counter problem |
| E064 | Scan problem, or power supply |
| E202 | Scan problem |
| E210 | Lens drive problem or lens sensor |
| E220 | Exposure lamp stays on or off |
| E240 | DC controller (main board) or composite power supply |
| E261 | Zero cross problem. Power frequency or composite power supply |
| E400 | Communication problem between boards |
| E803 | 24 volt problem |
| EO | Fuser problem |
| H | Fuser overheat |
| Код ошибки | Описание |
|---|---|
| E000 | Fuser did not heat up |
| E001 | Fuser temperature too high |
| E002 | Fuser temperature not rising at correct pace |
| E003 | Fuser temperature drops |
| E004 | SSR shorted |
| E210 | Lens home problem |
| E212 | Lens home problem |
| E220 | Exposure lamp problem |
| E224 | Blank shutter home problem |
| E240 | DC controller or composite power supply problem |
| E400 | Data communication problem |
| E401 | Pickup motor problem |
| E402 | Belt motor problem |
| E403 | Feeder motor |
| E404 | Delivery motor |
| E411 | Document detect sensor |
| E500 | Communication problem with copier |
| E510 | Feeder motor |
| E530 | Home sensor |
| E531 | Staple swing sensor problem |
| E540 | Bin shift motor rotation problem |
| E541 | Bin motor |
| E710 | DC controller |
| E711 | Document feeder IC failure |
| E716 | Cassette feed IC failure |
| E800 | Auto power-off circuit problem |
| E901 | Cassette feed motor |
| E902 | Paper guide home sensor problem |
| Код ошибки | Описание |
|---|---|
| E000 | Fuser did not heat up. Lamp, thermal switch, thermistors, connections, AC driver, DC controller, SSR, etc |
| E001 | Fuser temperature too high. Same possibilities as E000, as well as shorted wire |
| E002 | Fuser temperature not rising at correct pace. Same possibilities as E000 |
| E003 | Fuser temperature drops. Same as E003 |
| E004 | Fuser problem. AC driver, SSR bad, wire shorted |
| E010 | Drive problem. Main motor, gears, etc |
| E030 | Total counter |
| E064 | Composite power board or DC controller |
| E065 | Composite power board or DC controller |
| E202 | Scan motor or scan sensor problem. Panel locked with no Код ошибки. Scan motor problem |
| E203 | Scan problem or scan sensor |
| E204 | Scan problem or scan sensor |
| E210 | Lens sensor or motor problem |
| E212 | Lens sensor or motor problem |
| E220 | Exposure lamp or exposure lamp regulator board |
| E224 | Blanking shutter motor or sensor |
| E240 | DC controller or composite power supply problem |
| E244 | DC controller |
| E400 | RDF to copier communication problem |
| E401 | RDF Pickup motor or pick up sensor |
| E403 | RDF feed motor or pulse sensor |
| E404 | RDF delivery motion problem |
| E404 | RDF delivery motor problem |
| E411 | RDF tray sensor or registration sensor |
| E500 | Sorter main board or communication with copier |
| E510 | Sorter feed motor |
| E530 | Sorter guide bar motor |
| E531 | Sorter stapler motor |
| E540 | Sorter bin shift motor |
| E541 | Sorter bin motor |
| E550 | Sorter power supply |
| E710 | DC controller |
| E711 | DC controller |
| E712 | Document feeder IC failure |
| E716 | DC controller. Sorter |
| E800 | Auto power off function (DC controller) |
| E901 | Pedistal motor |
| E902 | Jogger side plate sensor or motor |
| Код ошибки | Описание |
|---|---|
| E000 | Fuser did not heat up. Lamp, thermal switch, thermistors, connections, AC driver, DC controller, SSR, etc |
| E001 | Fuser temperature too high. Same possibilities as E000, as well as shorted wire |
| E002 | Fuser temperature not rising at correct pace, same possibilities as E000 |
| E003 | Fuser temperature drops. Same as E000 |
| E004 | Fuser problem: AC driver, SSR bad, wire shorted |
| E005 | Fuser cleaning web, or problem with sensor, lever or connector. Service mode 6 is the probably reset for this |
| E006 | Fuser feed connector |
| E010 | Drive problem. Main motor, gears, etc |
| E013 | Waste toner drive problem, or waste toner sensor switch has been actuated too many times |
| E015 | Pickup motor power supply. Could be bad motor or motor board, or DC controller |
| E020 | Problem with developer unit, toner hopper, hopper motor, connection, sensor or DC controller |
| E030 | Total counter |
| E031 | Option counter or total counter |
| E050 | Holding tray (duplex) home position sensor motor or board |
| E051 | Holding tray (duplex) home sensor motor or board |
| E202 | Panel locked up, but might be no Код ошибки, scan motor problem |
| E203 | Scan problem or scan sensor |
| E204 | Scan problem or scan sensor |
| E210 | Lens sensor or motor problem |
| E212 | Lens sensor or motor problem |
| E213 | Scan lock sensor or lock solenoid |
| E220 | Exposure lamp regulator board |
| E240 | DC controller or composite power supply problem |
| E243 | DC controller |
| E400 | RDF to copier communication problem |
| E401 | RDF pickup motor or pickup sensor |
| E402 | RDF belt motor or pulse sensor |
| E403 | RDF feed motor or pulse sensor |
| E411 | RDF tray sensor or registration sensor |
| E500 | Sorter main board or communication with copier |
| E510 | Sorter feed motor |
| E522 | Sorter push bar motor |
| E523 | Sorter reference wall motor |
| E524 | Sorter multi-guide motor |
| E525 | Sorter bin paper sensor automatic adjustment problem |
| E526 | Sorter bin paper sensor automatic adjustment problem |
| E530 | Sorter guide bar motor |
| E531 | Sorter stapler motor |
| E532 | Stapler motor |
| E533 | Stapler inside paper sensor |
| E540 | Sorter bin shift motor |
| E550 | Sorter power supply |
| E710 | DC controller |
| E711 | DC controller |
| E712 | Document feeder IC failure |
| E713 | DC controller, sorter |
| E800 | Auto power off circuit problem. Main switch or DC controller |
| E802 | Auto power off circuit problem. Main switch or DC controller |
РОСКАРТ - заправка картриджей samsung, ремонт принтеров samsung, МФУ samsung, копиров samsung с выездом по г. Москве.
Выезд мастера на заправку картриджей - БЕСПЛАТНО.
Сделать заказ заправки картриджей:
1. позвоните по телефону: (495) 778-52-50, (495) 778-50-45
2. заполните форму обратной связи
3. Напишите нам на e-mail: info@roscart.ru